Shuttle Touch PC P52U - Celeron

Ready installed with ChamSys MagicQ. (Celeron 5205U, 4GB Ram)

    Deze combinatie bestaat niet.


    Prices excluding VAT
    Terms & conditions

    Internal Reference: SHU-PAK-P0520T01
    Technische Fiche:

    Touch PC - Ready installed for MagicQ

    The ideal PC for running MagicQ PC. Ready installed with ChamSys MagicQ.
    Attention can not be used for MagicVis and MagicHD!

    All-in-One PC

    With this all-in-one we expand the product range of All in- One PCs. It is a smaller version in a 15"6 inch format and with a capacitive touchscreen.

    An Intel Ultra-Low-Voltage (ULV) processor makes for high computing power while it keeps energy consumption at a low level. Thanks to its passive cooling, the system is virtually noiseless, maintenance-free and approved for 24/7 nonstop operation. Particularly suitable for vertical applications is the arrangement of connectors at the bottom and the IP54 compliant front panel which is dust -protected and protected from splashing of water.

    • Fanless and silent
      Passive heatpipe cooling, absolutely no fan noise
      Perfect for noise-sensitive environments
      Fanless, dust-free and thus virtually maintenance-free
    • 24/7 nonstop operation
      This device is approved for 24/7 permanent operation.
      - Free circulation of air amongst the PC must be guaranteed.
      - Ventilation holes must be kept clear.
      - If a hard disk is installed, this must also be approved 
      for permanent operation by its manufacturer.
    • IP54 protected
      The front panel is dust-protected and protected from 
      splashing of water according to protection class IP54.
    • Chassis
      Colour: black
      Dimensions: 393.6 x 272.5 x 39.8 mm (W x H x D) 
      100 mm VESA mountable
      Hole for Kensington lock
      Weight: 3.25 kg net, 4.5 kg gross
    • Operating system
      This system comes without operating system.
      It is compatible with:
      - Windows 11 - 64-bit
      - Windows 10 - 64-bit
      - Linux - 64-bit
    • Touchscreen
      Touchscreen function supports fingertip input
      Capacitive Touch Panel with 10-point multi-touch
      Supports touch input with gloves made of PVC, cotton, cotton/linen - max. 0.4 mm thick
      Stylus pen not supported
    • 39.6 cm display (15.6")
      39.6 cm / 15.6" LC display, IPS technology
      Ratio: 16:9 wide-screen panel
      Native resolution: 1920 x 1080 = 2 Megapixel (Full HD / 1080p)
      Brightness: 250 cd/sqm
    • Processor
      Model: Intel Celeron 5205U (ULV)
      System-on-a-chip architecture (SoC): no chipset required
      FCBGA1528 package - directly soldered onto the mainboard
      Code name: Comet Lake-U (10th Generation Intel Core)
      Cores / Threads: 2 / 2
      Clock rate: 1.9 GHz
      L1/L2/L3 Cache: 256 kB / 1 MB / 2 MB
      Memory controller: DDR4-2400 Dual Channel (1.2 V)
      TDP wattage: 15 W maximum
      Manufacturing process: 14 nm
      Maximum Tjunction Temperature: 100 °C
      Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
    • Integrated Graphics
      Intel HD Graphics 610
      GPU clock frequency: 300~900 MHz
      Execution Units (EUs): 12
      Supports DirectX 12
      Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
      Supports Quick Sync Video and Clear Video HD technology
    • Up to three displays simultaneously
      Two video ports support two additional independent screens:
      1) HDMI 1.4b supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
      2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
      Multi-Monitoring modes as follow:
      Clone mode: All displays show the same content at 1920 x 1080.
      Extended mode: All displays show different content.
    • BIOS
      AMI BIOS in 16 MByte EEPROM with SPI interface
      Supports Power-on-after-power-fail / always on
      Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
      Supports hardware monitoring and Watchdog function
      Supports Firmware TPM v2.0 function
    • Memory
      2x SO-DIMM slot with 260 pins
      Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
      Also compatible with DDR4-2666/3200 memory modules
      Supports Dual Channel mode
      Supports a maximum of 32 GB per DIMM,  maximum capacity: 64 GB
      Supports two unbuffered DIMM modules (no ECC or registered)
    • 2.5" Hard disk drive / SSD
      Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
      The SATA 3.0 interface supports up to 600 MB/s of data transfer speed (6 Gbit/s)
      Supports one drive with up to 9.5 mm in height
      SATA cable pre-installed
    • M.2-2280 Slot
      The M.2 2280 BM slot provides the following interfaces:
      - PCI-Express Gen. 2.0 X4
      - SATA v3.0 (max. 6 Gbps)
      It supports M.2 cards with a width of 22 mm and a length of 80mm.
      Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe-SSDs (with M key)
    • Card Reader
      Integrated card reader supports SD, SDHC and SDXC memory flash cards
    • Webcam
      Integrated Full-HD 2.0 Megapixel (1920 x 1080)  camera
    • Microphone and speakers
      Front panel with integrated Electret Condenser Microphone and
      2x 2 W speakers
    • Integrated Audio
      C-Media CM6542 (USB) or Realtek ALC269 (HD Audio)
      Two analog audio connectors (3.5 mm) on the bottom side: 
      1) Line-out (head-phones)
      2) Microphone input
      Digital Audio is supported via HDMI.
    • Wired Network
      Intel 219 Ethernet Controller
      Supports 10 / 100 / 1.000 MBit/s operation
      Supports WAKE ON LAN (WOL) from S3, S4 modes
      Supports network boot by Preboot eXecution Environment (PXE)
    • M.2 slot for WLAN
      M.2-2230E slot supports USB2.0, PCIe X1 and CNVi
      suitable for commonly available WLAN modules in M.2 format
      Two internal WLAN antennas for 2.4/5 GHz are already pre-installed.
      The chassis has two 7-mm perforations for optional external antennas.
    • Front LEDs
      Power LED (blue)
      Hard disk LED (orange)
      Battery LED (red) - reserved, no function
    • Connectors left side
      Power button
      2x USB 3.2 Gen. 1 (max. 5 Gb/s, blue)
      SD card reader
      Hole with Clear CMOS button
    • Connectors right side
      Optional: 2x COM/serial (D-Sub, RS232)
      Hole for the Kensington Lock
    • Connectors bottom side
      HDMI 1.4b (supports digital video and digital audio)
      VGA connector (D-Sub 15 pol., analog video)
      2x USB 3.2 Gen. 1 ( max. 5 Gb/s, blue)
      2x USB 2.0
      2x COM/serial (D-Sub, RS232)
      Gigabit Network (LAN, RJ45)
      Audio Line-out / headphones (3.5 mm jack)
      Microphone input (3.5 mm jack)
      DC input for external power adapter (5.5 / 2.5 mm)
      2x Perforation for optional WLAN/LTE antennas (diameter: 7 mm)
    • Connectors onboard
      Internal USB 2.0 type A connector for a USB stick
      Serial ATA (6 Gbps) data/power combo connector
      3x USB 2.0 header (all occupied)
      Microphone connector (2-pin, occupied)
      Speakers connector (4-pin, occupied)
      eDP connector (Embedded DisplayPort) - occupied by the display
      LPC connector (occupied)
      I2C connector
      CMOS battery connector (2-pin occupied)
    • Opening holes for optional antennas
      The chassis features two perforated 7 mm holes
      for optional antennas mounted with an (RP-)SMA connector
      for wireless network such as WLAN or WWAN (e.g. LTE)
    • Power adapter
      External 65 W power adapter (fanless)
      Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
      Output: 19 V DC, max. 3.42 A, max. 65 W
    • DC Input connector
      DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
      The DC-input of the computer supports an external
      power source with either 12V ±5 % or 19V ± 5%.
    • Included Accessories
      Quick Guide
      Driver DVD
      2x bracket to install a 2.5" drive
      External Power Adapter (65W / 19V)
      Power cord (2 pins)
      Screws (2x for M.2 slots, 8x for 2.5" bay)
    • Optional Accessories
      1) COM port adapter PCP21 or 2x PCP11  
      provides two more serial COM ports on the right side
      2) M.2 WLAN module with two external Antennas:
      WLN-M (802.11ac) or WLN-M1 (802.11ax)
      Two internal WLAN antennas are already pre-installed and can be used instead of the external antennas.
    • Environmental criteria
      Operating temperature: 0~40 °C
      Humidity: 10~90 %
    • Certification and Compliance
      - Safety: CB 60950/62368, cTUVus, BSMI
      - Other compliances: RoHS, ErP Lot3, Energy Star