Shuttle Touch PC P52U - i3

https://www.avl.be/web/image/product.template/4403/image_1920?unique=6353a84

Ready installed with ChamSys MagicQ. (i3 CPU, 8GB Ram)

Deze combinatie bestaat niet.

Prijzen exclusief btw
Algemene voorwaarden


Interne referentie: SHU-P52Ui3

Touch PC - Ready installed for MagicQ

The ideal PC for running MagicQ PC. Ready installed with ChamSys MagicQ.
Attention can not be used for MagicVis and MagicHD!

All-in-One PC

With this all-in-one we expand the product range of All in- One PCs. It is a smaller version in a 15"6 inch format and with a capacitive touchscreen.

An Intel Ultra-Low-Voltage (ULV) processor makes for high computing power while it keeps energy consumption at a low level. Thanks to its passive cooling, the system is virtually noiseless, maintenance-free and approved for 24/7 nonstop operation. Particularly suitable for vertical applications is the arrangement of connectors at the bottom and the IP54 compliant front panel which is dust -protected and protected from splashing of water.

  • Fanless and silent
    Passive heatpipe cooling, absolutely no fan noise
    Perfect for noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • 24/7 nonstop operation
    This device is approved for 24/7 permanent operation.
    Requirements:
    - Free circulation of air amongst the PC must be guaranteed.
    - Ventilation holes must be kept clear.
    - If a hard disk is installed, this must also be approved 
    for permanent operation by its manufacturer.
  • IP54 protected
    The front panel is dust-protected and protected from 
    splashing of water according to protection class IP54.
  • Chassis
    Colour: black
    Dimensions: 393.6 x 272.5 x 39.8 mm (W x H x D) 
    100 mm VESA mountable
    Hole for Kensington lock
    Weight: 3.25 kg net, 4.5 kg gross
  • Operating system
    This system comes without operating system.
    It is compatible with:
    - Windows 11 - 64-bit
    - Windows 10 - 64-bit
    - Linux - 64-bit
  • Touchscreen
    Touchscreen function supports fingertip input
    Capacitive Touch Panel with 10-point multi-touch
    Supports touch input with gloves made of PVC, cotton, cotton/linen - max. 0.4 mm thick
    Stylus pen not supported
  • 39.6 cm display (15.6")
    39.6 cm / 15.6" LC display, IPS technology
    Ratio: 16:9 wide-screen panel
    Native resolution: 1920 x 1080 = 2 Megapixel (Full HD / 1080p)
    Brightness: 250 cd/sqm
  • Processor
    Model: Intel Celeron 5205U (ULV)
    System-on-a-chip architecture (SoC): no chipset required
    FCBGA1528 package - directly soldered onto the mainboard
    Code name: Comet Lake-U (10th Generation Intel Core)
    Cores / Threads: 2 / 2
    Clock rate: 1.9 GHz
    L1/L2/L3 Cache: 256 kB / 1 MB / 2 MB
    Memory controller: DDR4-2400 Dual Channel (1.2 V)
    TDP wattage: 15 W maximum
    Manufacturing process: 14 nm
    Maximum Tjunction Temperature: 100 °C
    Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
  • Integrated Graphics
    Intel HD Graphics 610
    GPU clock frequency: 300~900 MHz
    Execution Units (EUs): 12
    Supports DirectX 12
    Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
    Supports Quick Sync Video and Clear Video HD technology
  • Up to three displays simultaneously
    Two video ports support two additional independent screens:
    1) HDMI 1.4b supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
    2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
    Multi-Monitoring modes as follow:
    Clone mode: All displays show the same content at 1920 x 1080.
    Extended mode: All displays show different content.
  • BIOS
    AMI BIOS in 16 MByte EEPROM with SPI interface
    Supports Power-on-after-power-fail / always on
    Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
    Supports hardware monitoring and Watchdog function
    Supports Firmware TPM v2.0 function
  • Memory
    2x SO-DIMM slot with 260 pins
    Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
    Also compatible with DDR4-2666/3200 memory modules
    Supports Dual Channel mode
    Supports a maximum of 32 GB per DIMM,  maximum capacity: 64 GB
    Supports two unbuffered DIMM modules (no ECC or registered)
  • 2.5" Hard disk drive / SSD
    Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
    The SATA 3.0 interface supports up to 600 MB/s of data transfer speed (6 Gbit/s)
    Supports one drive with up to 9.5 mm in height
    SATA cable pre-installed
  • M.2-2280 Slot
    The M.2 2280 BM slot provides the following interfaces:
    - PCI-Express Gen. 2.0 X4
    - SATA v3.0 (max. 6 Gbps)
    It supports M.2 cards with a width of 22 mm and a length of 80mm.
    Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe-SSDs (with M key)
  • Card Reader
    Integrated card reader supports SD, SDHC and SDXC memory flash cards
  • Webcam
    Integrated Full-HD 2.0 Megapixel (1920 x 1080)  camera
  • Microphone and speakers
    Front panel with integrated Electret Condenser Microphone and
    2x 2 W speakers
  • Integrated Audio
    C-Media CM6542 (USB) or Realtek ALC269 (HD Audio)
    Two analog audio connectors (3.5 mm) on the bottom side: 
    1) Line-out (head-phones)
    2) Microphone input
    Digital Audio is supported via HDMI.
  • Wired Network
    Intel 219 Ethernet Controller
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports WAKE ON LAN (WOL) from S3, S4 modes
    Supports network boot by Preboot eXecution Environment (PXE)
  • M.2 slot for WLAN
    M.2-2230E slot supports USB2.0, PCIe X1 and CNVi
    suitable for commonly available WLAN modules in M.2 format
    Two internal WLAN antennas for 2.4/5 GHz are already pre-installed.
    The chassis has two 7-mm perforations for optional external antennas.
  • Front LEDs
    Power LED (blue)
    Hard disk LED (orange)
    Battery LED (red) - reserved, no function
  • Connectors left side
    Power button
    2x USB 3.2 Gen. 1 (max. 5 Gb/s, blue)
    SD card reader
    Hole with Clear CMOS button
  • Connectors right side
    Optional: 2x COM/serial (D-Sub, RS232)
    Hole for the Kensington Lock
  • Connectors bottom side
    HDMI 1.4b (supports digital video and digital audio)
    VGA connector (D-Sub 15 pol., analog video)
    2x USB 3.2 Gen. 1 ( max. 5 Gb/s, blue)
    2x USB 2.0
    2x COM/serial (D-Sub, RS232)
    Gigabit Network (LAN, RJ45)
    Audio Line-out / headphones (3.5 mm jack)
    Microphone input (3.5 mm jack)
    DC input for external power adapter (5.5 / 2.5 mm)
    2x Perforation for optional WLAN/LTE antennas (diameter: 7 mm)
  • Connectors onboard
    Internal USB 2.0 type A connector for a USB stick
    Serial ATA (6 Gbps) data/power combo connector
    3x USB 2.0 header (all occupied)
    Microphone connector (2-pin, occupied)
    Speakers connector (4-pin, occupied)
    eDP connector (Embedded DisplayPort) - occupied by the display
    LPC connector (occupied)
    I2C connector
    CMOS battery connector (2-pin occupied)
  • Opening holes for optional antennas
    The chassis features two perforated 7 mm holes
    for optional antennas mounted with an (RP-)SMA connector
    for wireless network such as WLAN or WWAN (e.g. LTE)
  • Power adapter
    External 65 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
    Output: 19 V DC, max. 3.42 A, max. 65 W
  • DC Input connector
    DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
    The DC-input of the computer supports an external
    power source with either 12V ±5 % or 19V ± 5%.
  • Included Accessories
    Quick Guide
    Driver DVD
    2x bracket to install a 2.5" drive
    External Power Adapter (65W / 19V)
    Power cord (2 pins)
    Screws (2x for M.2 slots, 8x for 2.5" bay)
  • Optional Accessories
    1) COM port adapter PCP21 or 2x PCP11  
    provides two more serial COM ports on the right side
    2) M.2 WLAN module with two external Antennas:
    WLN-M (802.11ac) or WLN-M1 (802.11ax)
    Two internal WLAN antennas are already pre-installed and can be used instead of the external antennas.
  • Environmental criteria
    Operating temperature: 0~40 °C
    Humidity: 10~90 %
  • Certification and Compliance
    - EMI: CE, UKCA, FCC, RCM, VCCI, BSMI
    - Safety: CB 60950/62368, cTUVus, BSMI
    - Other compliances: RoHS, ErP Lot3, Energy Star