• 2e hands/demo
  • 3D Visualisatie
  • Dimmers
  • DMX/Ethernet
    • 0-10V naar DMX
    • Accessoires
    • Artnet Nodes
    • Audioplayer
    • DMX naar 0-10V
    • DMX opname
    • DMX splitters
    • DMX-Relais
      • DMX products
        • DMX switching
    • Draadloze DMX
    • Draadloze DMX - Accessoires
    • Ethernet Switch
    • Remote controllers
    • Video over IP
  • Flightcases
  • Gobos
  • Intercom - Cue Light System
  • Kabels
  • Lampen
  • LCD Schermen
  • LED
  • LED schermen
  • Lichtsturingen
  • Logoprojectoren
  • Mediaplayers
  • Mediaservers
  • Motor Controllers
  • Moving Heads
  • Podia
  • Projectieschermen
  • Rigging
  • Rook/Haze
  • Signalisatie verlichting
  • Strobo
  • Stroomdistributie
  • Theaterspots
  • Touch screens
  • Video Projectors
Filter op merk
Vorige Naar overzicht Volgende

DSP16 16 ch. relayboard 42V/2A SPDT, plug connectors

Artikel: 3838010015 - DSP16-snap

DMX512 controls 16 relays now available with SPDT contacts.
Comfortable Installtion with plug connector and LED display per channel.
Supplyvoltage fix 230V~ or 85-264V, with modes for motorized curtains and blinds and more.

Switchboard DSP16 Rev. G DMX512 controls 16 relays now available with SPDT contacts.
Comfortable Installtion with plug connector and LED display per channel.

The DSP16 is a 16 channel relay switchboard controlled by DMX512. Each of the 16 relays is able to switch a maximum of 42V/2A =/~ inrush and continous current. The connection is carried out with plug connectors for every channel. For better control of the switching condition the new DSP16 version has a LED per channel. Next to the base functions, "one DMX channel for one relay", even further modes can be chosen by a DIP switch.

In the course of the revision of the DSP16 the power supply was enlarged for mains voltages between 85V and 264V~. A direct voltage supply between 10V and 30V dc is also deliverable.

Also see DSP8 for applications with load relays.


Examples of modes :


1.) 16 ON / OFF switches, each relay corresponds to one DMX channel and will be switched on at a value greater than 60% and will be switched off at a value less than 40%. A hysteresis of 3% (7digits) to 2% (4 digits) is available, too.


2.) 16 push-buttons, every relay is switched on for 1 second . Hysteresis same as 1.


The modes 1.) or 2.) can be selected for mutual locking (channel 1-2, 3-4, ...). (Open / close of motorized blinds)


3.) Control of color changers, one DMX channel controlling 4 relays. All 4 relays are switched individually, subsequently and depending on the DMX value. Relay 1 will switch on at a value > 20 %, at > 40 %, relay 1 will be switched off and relay 2 takes over. Corresponding at the values 60% and 80%. A value less than 20% turns all relays off.


4.) Motorized curtain Close,(Stop),Open, 3 relays controlled by one DMX channel. "Single fader control"


5.) As 4) but Open / Close single impulse.


Furthermore, the operating mode in case of DMX failure can be determined: hold the last value or black all.
The DMX start address [001 - 512] is set in a decimal mode via the rotary switches. Other addresses can activate the test mode or mute the DSP16.

Two further LEDs (power on & DMX signal) indicate the operation status of the DSP16.
The ac power supply and the DMX input also are equipped with plug connectors.
A DMX512 termination is available, too.



external rotary- & push button codeswitches.

ree for functions and interfaces specified by customer (e.g. MIDI, ASCII, ...)

DIN-rail mounting option - SNAP


Technical data:

Supplyvoltage: 85 -264V 47-65Hz

Interface: DMX512-1990, optical isolated

Dimensions: 160 x 100 x 55 mm

Weight: 280g

Bijlagen brochure